View Single Post
Old 04-30-2018, 11:30 AM   #387
JasontheBeaver
Registered User
 
Join Date: Mar 2012
Location: Beaverton, OR
Posts: 18
Re: Power Brake Booster Adapter Bracket

Quote:
Originally Posted by Captainfab View Post
If you want the booster and master assembly to be installed correctly as the GM engineers designed, then yes you will need one of my booster brackets. With a drum/drum braking system all you need is a '67-'70 booster and master cylinder assembly and one of my booster brackets to correctly and securely mount it to your firewall.
So I would need a master cylinder and booster from this page correct?
If I buy that setup then I would also need to find a proportioning/combination valve to route the two lines coming out of the new cylinder, correct?
The previous kit I linked included a combination valve, this one does not.
I've tried researching this prior to asking potentially dumb and/or repeated questions but there are myriad paths.
I just want as close to bolt-on as possible. I understand there will be rerouting of the lines, but I do not have the ability to do any welding or fabrication.
I appreciate your help man!
JasontheBeaver is offline   Reply With Quote