I wasn't sure if I should necro
this thread, or start a new thread, so I thought I'd just continue on my thread.
I decided to get the rebuilt quadrajet from Summit I linked to above (SUM-250216).
It came with the open gasket, which is .25" (1/4") thick.
The Holley I took off, which I think is a 4360, had the 4-hole gasket, which is 1/8" (.125") thick, and it had a manual choke.
My question is, should I use the open gasket, or get a 4-hole gasket, and should I get one that is 1/4" thick or 1/8" thick?
Thanks!