Quote:
Originally Posted by Tri5Nerd
Master Kabwe, I know you did already but how are you going to attach the bracket that goes under the step and attach to the bed? I want to know becuase that's going to be my next mod when I complete the hood.
I know there are 2 bolts that attach them together.
Tri5
|
Tri5nerd,
This is how I did it I know picture is worth a thousand words so here you go.
I drill the holes in the step.
Then I shaved the head off the bolts. The way I did it bolted the bolt to some metal and used a sawzall to cut the head off.
Then I use a washer that was small enough to not let what the remains of the head slip through
and welded the washer to the panel
Flipped it over and welded the top and grind it smooth.
I couple of shot of it installed
