The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 10-13-2010, 10:00 PM

This is what I have. The kit is from Jegs it's for a jeep if I remember right. I had to drill a hole in the rubber pads for the air line and that was all. No more bottoming out either.

Ran the air lines back and made them the tag holders.They are great and I haven't had any air since I got them aired up.

10-13-2010, 10:00 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: rear helper bags This is what I have. The kit is from Jegs it's for a jeep if I remember right. I had to drill a hole in the rubber pads for the air line and that was all. No more bottoming out either. Ran the air lines back and made them the tag holders.They are great and I haven't had any air since I got them aired up. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.