[RodnRudy]

I've been fighting a HEI problem ever since I've had my 68 C10 done. I bought a new AC Delco distributor when I built the 350. I have a AAW wiring kit installed so I've got the correct wire to the distributor.
About every 2 or 3 thousand miles I loose fire at the distributor. I've replaced the module each time, I've gone through 4 or 5, and the truck'll start right up and run fine till it decides not to start again. My question is is there something in the distributor that can be causing the modules to go bad? I replaced the coil with one off the shelf, didn't help. I just ordered a new DUI distributor from Summit out of frustration. Any and all help or advice is welcomed.