|
Re: Rat repair.
Here's a couple pic's
One of the outer nuts after i wet stoned it to remove the chisel burrs.
Passenger side done!
Now one more setback, when i bought my calipers and other parts i never checked the throat depth of the calipers, the boxes have the correct part number needed to be used for the HD rotors, i just degreased and masked off and painted them without a second thought. After i got the passenger side together i grabbed the caliper and it don't fit over the rotor... I measured the throat and it was smaller than the one for the driver side, hard to see with the naked eye but about 1/8th difference if i recall correctly. Tomorrow i head back to the auto parts store to do an exchange on the calipers, now i'm out the cost of a can of VHT high temp caliper paint.
I got the other spindle polished down and test fitted so its ready to install again tomorrow.
|