[E911manager]

Spent a couple of hours tearing into the front end of the caprice frame/radiator support and mocking in the 64 pickup radiator support. Lots of looking, planning and loss of sleep on this one. I have worn out a tape measurer on this project already.... The first pic is what i started with. The last two are preliminary looks at placement. i will have about 9 inches to work with. the caprice radiator is 3 inches and the fans are another 3 inches. That should give me 3 inches to spare at the closest point. But that is just the fan motors. i may end up moving the radiator into the 64 chevy radiator support about 2 inches to give more clearance. I will deal with that later.. It is what it is..