The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Pontiac1976 · 07-22-2019, 10:45 AM

If not then your going to have to try wrecking yard that has lots truck of the 73-80.
I think you need the top section mostly. I be leave the bottom is the same in one of the
option or will work with the top. I have to see them as I do not remember any more It's been along time I checked that out. If it the None a/c or the a/c option can work.

07-22-2019, 10:45 AM	#3
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 750	Re: 1980 Fan Shroud W/AC If not then your going to have to try wrecking yard that has lots truck of the 73-80. I think you need the top section mostly. I be leave the bottom is the same in one of the option or will work with the top. I have to see them as I do not remember any more It's been along time I checked that out. If it the None a/c or the a/c option can work. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.