[forestb]

So I pulled the trigger. Literally the drill trigger. I have been trying to figure out how to best install my belt line fuzzies. I removed the clips and cut about an inch off of the curved part and started drilling Holes through the fuzzies and into the window opening and screwed some vary small screws and it worked. The passenger side works just as I would like. The driver side is almost as good. When the window is all the way up it pushes out the outside door skin a little bit. I think I still need to take the window out and readjust how it sits in the channel. Window down and window up. It scared me to death to try this because I didn’t want to mess up the paint. But I laid down enough layers of tape to protect the paint when the drill ran into it.