View Single Post
Old 08-21-2006, 09:25 AM   #1
jamon8
Registered User
 
jamon8's Avatar
 
Join Date: Apr 2006
Location: southern Il
Posts: 335
74 crossmember in a 69 c-10

I am about to pull a disc brake crossmember out of a 74 c-10 that had hydroboost, but I dont think that will matter

what kind of problems will i run into swapping that crossmember, control arms and brakes into my 69 c-10

I am not so concerned with the brake set-up because I have a booster and master cylinder to match.

what I am really concerned with is the bolt up of the crossmember such as-

1. what am I to do with the motor mounts- I have brand new set on the old set-up

2. will all the nessesary bolt holes line up or will I have to do some drillin

3.will the new tie rod ends work in the 74 spindals.

thanks in advance for the info. I try to anticipate and solve oncomming problems before I start pulling my baby apart more than she already is.
jamon8 is offline   Reply With Quote