The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dec010974 · 09-26-2018, 10:20 PM

hello 19SIKtySix. I hope all is well. i tried to hit you up on IG but you are private. from the pics i saw, doing the harness is pretty much cut and dry. oh, yeah, i've done this before. dm me your number and i call you to explain anything to help you out. Listen to LS1nova71, he's a god when it comes to LSx swaps. in a few of my own swaps, i put the stock harness, with no wires removed, on the engine and tranny, plug up a vats deleted pcm, wired my fuel pump, grounded the block, frame, engine, added 12v+ power/Ingniton and fire the motor up. of course i added fuel and connected the starter, but its easy.

09-26-2018, 10:20 PM	#17
dec010974 Registered User Join Date: Oct 2012 Location: Miami, Florida Posts: 911	Re: Finish Wiring of a Stand Alone Harness hello 19SIKtySix. I hope all is well. i tried to hit you up on IG but you are private. from the pics i saw, doing the harness is pretty much cut and dry. oh, yeah, i've done this before. dm me your number and i call you to explain anything to help you out. Listen to LS1nova71, he's a god when it comes to LSx swaps. in a few of my own swaps, i put the stock harness, with no wires removed, on the engine and tranny, plug up a vats deleted pcm, wired my fuel pump, grounded the block, frame, engine, added 12v+ power/Ingniton and fire the motor up. of course i added fuel and connected the starter, but its easy.