|
Re: Wampus Cat
Driver door
Hammer and dolly work done with my brother; an extra set of hands really helps.
Weld-filled about 32 drilled holes from old mirrors and previous body work (left the stock mirror mounting points but had to ezy-out a couple of broken mounting bolts).
Patches created and welded in for rust in the inner and outer lower corners.
Weld repaired cracks around the latch mounting holes and at the bottom of the window opening.
The first picture is the door when I picked it up from the media blaster. I had no idea that all of those holes and dents were lurking under the bondo and paint. The remaining pictures are prep work and epoxy primer.
.
|