The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Ridetech 4-Link Coil-Over Install

z71se · 09-30-2018, 05:09 AM

John @ Ridetech, I would like to know, why on earth isn't there a rod end at both ends of the panhard rod? Even getting things lined up during install, I have to bind the bar into place. I can only imagine what it's doing going down the road, even with a heim joint on the passenger side. Ever have anyone cut off the urethane bushing on the driver's side and weld on a reverse threaded piece of tubing so they could run a 2nd heim joint? Even the Mustang guys do it:

09-30-2018, 05:09 AM	#186
z71se Registered User Join Date: Nov 2015 Location: Cailfornia Posts: 284	Re: Ridetech 4-Link Coil-Over Install John @ Ridetech, I would like to know, why on earth isn't there a rod end at both ends of the panhard rod? Even getting things lined up during install, I have to bind the bar into place. I can only imagine what it's doing going down the road, even with a heim joint on the passenger side. Ever have anyone cut off the urethane bushing on the driver's side and weld on a reverse threaded piece of tubing so they could run a 2nd heim joint? Even the Mustang guys do it: __________________ 77 C10 Silverado SWB - LS Swap, mechanical resto-mod 05 Z71 Silverado RCSB - 5.3L LM7, 76mm turbo, 4L80e