[44boggers]

I forgot to add prior to the last post. I also got the interior cab all painted. I had everything stripped down to bare metal then epoxied it, laid down bed liner on the cab floor then base/clear coated the rest. After the epoxy I put fresh seam sealer. Its to bad basically all of this will be covered up.

One other thing I did to keep the engine compartment clean is that I am running a bulkhead style plug for the distributor plug wire to the coil. I will keep the coil and MSD box inside the cab.

Question about carpets, do they make carpet kits that go up the backside of the cab? If so then I will also sound deaden the section behind the seat.