The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Johnnyfever · 08-17-2013, 09:26 PM

And on to the process of shaving the key hole. First I removed the key hole lip with a hack saw. Then sanded it down smooth, filled it with a scrap piece of sheet metal steel cut to fit, and then the JB Weld. The next step was Rage Gold. This project might be a little strange, but I wanted to give it a try.

08-17-2013, 09:26 PM	#104
Johnnyfever Registered User Join Date: Oct 2011 Location: Belton, SC & Atlanta, GA Posts: 181	Re: 1970 Project Build And on to the process of shaving the key hole. First I removed the key hole lip with a hack saw. Then sanded it down smooth, filled it with a scrap piece of sheet metal steel cut to fit, and then the JB Weld. The next step was Rage Gold. This project might be a little strange, but I wanted to give it a try. Attached Images __________________ Yes, it's a Short Wheel Base, not a Short Wide Bed.