The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Charles1993 · 10-05-2020, 10:58 AM

Removed the differential, that was fun, required quite a bit of persuasion to separate the ubolts from the trailing arms. Also got started on the sanding/wire wheeling of the frame. Have to decide if I am going to replace the trailing arm bushings, based on the state of the other bushings I am thinking it would be best while everything else is coming apart.
Name: IMG_0679.jpg
Views: 730
Size: 74.1 KB

Name: IMG_0679.jpg
Views: 730
Size: 74.1 KB

Name: IMG_0678.jpg
Views: 695
Size: 79.1 KB

Name: IMG_0677.jpg
Views: 733
Size: 88.6 KB

10-05-2020, 10:58 AM	#12
Charles1993 Registered User Join Date: Jul 2009 Location: Columbus, GA Posts: 28	Re: 1969 Chevy C10 Removed the differential, that was fun, required quite a bit of persuasion to separate the ubolts from the trailing arms. Also got started on the sanding/wire wheeling of the frame. Have to decide if I am going to replace the trailing arm bushings, based on the state of the other bushings I am thinking it would be best while everything else is coming apart.