The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**clay68c10** · 03-17-2021, 12:45 PM

A shot with the buss bar. These are in TBI trucks, on the passenger firewall. A good grab at the junkyard.
I'm also running a one stud central ground. It's a nice way to make sure all these added circuits have an adequate ground.
The power and ground are both using the stock battery cables. Nice to have those, so may as well use them. The power lug will get some shrink tube or a different end, that's a lot of exposed metal there.
I'll make 3 mounting legs for the fuse/relay box. Now it's just held on one corner, at the convenient little flat spot on the wheel well.

03-17-2021, 12:45 PM	#184
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,899	Re: ClusterTruck; because that’s what it is A shot with the buss bar. These are in TBI trucks, on the passenger firewall. A good grab at the junkyard. I'm also running a one stud central ground. It's a nice way to make sure all these added circuits have an adequate ground. The power and ground are both using the stock battery cables. Nice to have those, so may as well use them. The power lug will get some shrink tube or a different end, that's a lot of exposed metal there. I'll make 3 mounting legs for the fuse/relay box. Now it's just held on one corner, at the convenient little flat spot on the wheel well. Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 03-17-2021 at 12:53 PM.