View Single Post
Old 05-10-2022, 05:15 AM   #41
OneOffStroker
Registered User
 
Join Date: Jan 2012
Location: Virginia Beach, VA
Posts: 282
Re: My 1967 Build (Finally)

Just wanted to mention real quick about your transmission choice and some things that go with it: with the 4L60 (700R-4) it is essential to have the TV cable adjusted PERFECTLY or you will turn the insides of the trans to silly putty within the first few miles. Spend the extra money to get a factory-style cable with the ratchet action and the reset button...the Lokar style cables are nice, but difficult to adjust correctly. The other option is to buy a constant-pressure valve body from TCI that ensures the trans will survive if the cable comes out of adjustment.

Finally, with your choice to go to a 30" tire to fill the fender gap better, you may only spin like 1600ish at 65mph (assuming your rear gear is the fairly standard 3.08 that these trucks came with.) That sounds good and all, but I can tell you from experience with my '69 Suburban 5.3LS/4L60E/3.08/31" tire it got absolutely terrible MPG on the highway. I figured that low revs would get better mileage, but it turns out I was quite wrong. A mild V8 will get best mileage at efficient torque, and that is ~2300rpm. So I'd recommend getting a 4.11 gearset (~2200rpm @ 65mph) or keeping the 3.08 and driving in 3rd gear, not overdrive (~2300rpm)
__________________
1972 C10 "Shop Truck" Build - EFI, 5-speed, Posi, and Patina http://67-72chevytrucks.com/vboard/s...d.php?t=834292
1957 Chevy pickup - Twin Turbo 5.3/NV3500, Jag IFS & IRS, AirRide http://67-72chevytrucks.com/vboard/s...d.php?t=606987
Check me out on YouTube - "Tiny Garage Fabrication" http://www.youtube.com/oneoffstroker
OneOffStroker is offline   Reply With Quote