Well I managed to squeeze in a few hours on the truck after work. The rotors came in today and yes they were the correct size. With 3300lb axle means bigger inner bearing. I was able to get the rotors on, calipers on, front brake lines in, and front tires back on.
I also received the power steering pump bracket, however, the return hose was brazed to the pump in front of where the bracket goes, in my attempt the separate the hose from the reservoir I managed to put a small hole in each one
I was able to solder them both and got the bracket on the engine to find the spacers were longer than what I needed. It came with 1.25 and I measure 5/8 to the pulley. Oh how I hate V-belts.