The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 11-04-2018, 07:32 AM

I don't think it will ever be a problem from heat. The rust on the manifold may cause some though. As long as you have a good clean connection you should be fine no matter where you end up putting it.. Normal grounding straps where on the back bolts of the valve covers to cab but if they are in place you should be Ok. If not add some to the motor to cab and frame.

11-04-2018, 07:32 AM	#52
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: My new project truck! I don't think it will ever be a problem from heat. The rust on the manifold may cause some though. As long as you have a good clean connection you should be fine no matter where you end up putting it.. Normal grounding straps where on the back bolts of the valve covers to cab but if they are in place you should be Ok. If not add some to the motor to cab and frame. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.