Quote:
Originally Posted by OKGMC4
I’d probably make some more square tube adjusters that are longer. I would want the cab as low as I could get to stop it from wanting to tip. Maybe make some wood spacers to set between the steps and the trailer floor? Could add more stability. Otherwise strapping that thing solid will be problematic.
|
Thanks for the suggestions. It doesn't seem to tippy just pushing it around the shop so not real worried about it tipping over. I have a 4x4 bolted to each bar then a 4x4 that goes from the 4x4 to the floor at the step brace which left a 1/8" space at the floor. I added a piece of rug at the top of each 4x4 and it is snug. I plan on ratchet straps from each end of the rotisserie to the trailer then one across the floor on the inside to the trailer. keeping it on the metal wheels not the larger tires. I will just have to go slow and especially around corners. Thank again Steve