[99 to Life]

12-21 making a little progress. Got front suspension tore out, cleaned frame up a little. coated the inside of frame with chassis saver also the back of the boxing plates. I got my rotors, spindles and brakes from BO and they look sweet. CPP has a really nice kit for the price. But.... I don't really haven instructions, so I printed out TCI's awesome instructions.

Took forever making sure things were lined up and then trying to level the dang xmember by myself sucked. you gotta be on your center of frame mark, the center of your frame rail marks, gotta be level side to side, then level front to back (I'm told they have rake build into the xmember, so I'm assuming I keep frame at zero deg and also the xmember, awaiting confirmation on that)

Didn't have time to get the top hats on. What I'll do and learned a cool trick from the web, is put a lower control arm on upside down and measure off the grease fitting back to the rear axle, that way I know I'm as square as can be.

got my plasma, but I need to buy the right receptacle for it. had to change welding wire right as I finally got xmember lined up, first tack and boom no wire, hoping I don't run outta gas at a bad time!!!