The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - T56 crossmember What did you use in your swap?

LS short box · 07-20-2020, 10:10 PM

I did a 68 C10 with a T56. Bought an aftermarket cross member. Hind sight I would of made a 2"x2" tube cross member with a "L" brackets welded to the ends that bolt to the frame rails. Add spacers as needed to the trans mount to get the engine angle correct. If you don't have a high hump trans cover you will need one.

07-20-2020, 10:10 PM	#3
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 1,923	Re: T56 crossmember What did you use in your swap? I did a 68 C10 with a T56. Bought an aftermarket cross member. Hind sight I would of made a 2"x2" tube cross member with a "L" brackets welded to the ends that bolt to the frame rails. Add spacers as needed to the trans mount to get the engine angle correct. If you don't have a high hump trans cover you will need one.