The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 03-08-2013, 04:27 AM

You do some nice woork on them. They look real. I use to love building them. I have a couple of the clod buster's my self. They were the big dogs back in the 90's when I played with them. I also built a dragster truck with a 5000RPM black magic motor that would leave black marks on the road when you took off.
They collect dust now.

The C/B I would run 2 - 7.2 battery packs at a time for longer run times.

This one has a 6 way radio for it. The roll bar had functional light in it.
The hood raises up and it crab steer's to. I installed all metal ball bearings in it instead of the plastic ones in the kit.

03-08-2013, 04:27 AM	#17
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: A gathering of small Chevrolets You do some nice woork on them. They look real. I use to love building them. I have a couple of the clod buster's my self. They were the big dogs back in the 90's when I played with them. I also built a dragster truck with a 5000RPM black magic motor that would leave black marks on the road when you took off. They collect dust now. The C/B I would run 2 - 7.2 battery packs at a time for longer run times. This one has a 6 way radio for it. The roll bar had functional light in it. The hood raises up and it crab steer's to. I installed all metal ball bearings in it instead of the plastic ones in the kit. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.