The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**StingRay** · 10-26-2018, 01:41 PM

Thanks

I made one from aluminum plate after making a template off of a good 4L80E and have acquired a 5.3 block for a jig. My neighbor is a welding instructor and welds up all the trans bell housings for one of the local wreckers. I'd looked at the 4L60E bell housing but that 12 o'clock tab was a lot different. I think I'm closer with the one I made. I'll post a pic when I get it put together.

10-26-2018, 01:41 PM	#3
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: 4L80E bell housing donor Thanks I made one from aluminum plate after making a template off of a good 4L80E and have acquired a 5.3 block for a jig. My neighbor is a welding instructor and welds up all the trans bell housings for one of the local wreckers. I'd looked at the 4L60E bell housing but that 12 o'clock tab was a lot different. I think I'm closer with the one I made. I'll post a pic when I get it put together. __________________ Saskatoon, Saskatchewan Canada