The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jmack91z28 · 03-26-2014, 11:41 AM

Well after finding highlanders steering column rebuild website I've discovered that I'm missing the insulator, canceling cam part and contact bushing. So I've got those on order. I'm considering ordering a complete modern wiring harness for the truck so I'm going to hold off on wiring the column up for the mean time.

The aftermarket radio is now removed and the radio opening appears to have been widened a little bit. Hopefully it'll be a fairly easy fix to bend the metal back... Still won't look good though.

Seat covers are being made as we speak, hopefully I can have them installed here in the next couple of weeks.

03-26-2014, 11:41 AM	#16
jmack91z28 Registered User Join Date: Oct 2012 Location: Midland NC Posts: 118	Re: 66 c10 project Well after finding highlanders steering column rebuild website I've discovered that I'm missing the insulator, canceling cam part and contact bushing. So I've got those on order. I'm considering ordering a complete modern wiring harness for the truck so I'm going to hold off on wiring the column up for the mean time. The aftermarket radio is now removed and the radio opening appears to have been widened a little bit. Hopefully it'll be a fairly easy fix to bend the metal back... Still won't look good though. Seat covers are being made as we speak, hopefully I can have them installed here in the next couple of weeks. __________________ 1961 C60 Viking 8' Dump 261 SM420 2-Speed Rear 1966 C10 Fleetside 350 W/ Saginaw 4 speed 1985 K10 Chevy 6.2 diesel 700r4 longbed 2001 Dodge 3500 Dually 24v NV5600 4x4 USMC Reserves Jason Last edited by jmack91z28; 03-26-2014 at 11:54 AM.