|
Re: Project 68 k10 LWB..aka "The Hulk"
Quote:
Originally Posted by 7dee2
Shoot I was hoping the sway bar was going to work out the way you had it mounted on the frame rails. Watching closely as I'm sure you'll come up with something really clean looking.
|
The above bracket will help with the angle and give a little flex in the front suspension. These brackets work good if you have a lift. I had an 85 back in the day that had blocks to lower the sway arm off the frame to give a better angle and assist with binding but it was rough riding so I made a set of these brackets and the rod was so much better. So since I think it swap will have the same problem I just went and ordered the shackle kit for the sway arm. I will post pictures when installed. The frame mounts of the sway arm should look the same.
__________________
1956 Chevy Bel Air 2 door
1956 Chevy 210 4 Door
1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD
1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E
1968 K10 LWB Dark green my son calls it "THE HULK Jr" HULK JR *SOLD*
GO  GO!!!
|