Quote:
Originally Posted by joedoh
if you havent swapped out the rear axle, you can use that size front and rear and a 2-2.5" spacer on the front and a 3" spacer on the rear.
I have never used a 4x4 axle. when I did the 20s without spacers I used 20x9 with 3.5" backspace, on this truck I have 20x8 with 4.5 backspace and a 3" spacer on the rear, on another truck I did a 15x10 (rears) with 4" backspace and no spacer, on yet another I did 15x8 with 4.5" backspace and a 2" spacer. There are a lot of ways to get there. If you did a 20x10 with the least backspace they sell, I think is 4", and the 20x8 on the front, it would look astounding but you stil lmay need a small spacer on a stock s10 axle.
|
What about a 17x7 Wheel with 4 backspacing 0 offset? I basically want this style of wheel
https://www.americanracing.com/wheels/torq-thrust/ with no spacers if I can. The bigger the better but anything 17's and over should be good. I do not have a problem swapping out the rear end. I am more worried about the front. All the wheels I found that were 20x8 with 3.5 backspacing were $600 per wheel.