The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Moroso "Perm-Align" Valve Cover Gaskets

**COBALT** · 09-03-2002, 05:12 PM

They're a rubber composite over a steel frame. OldIron suggested them to me, and they're absolutely awesome. No leaks what so ever, and I was having troubles before...

Scrub down the heads and valve covers with brake cleaner and some scotch-brite. Blow off any residue. Use absolutely NO tack! Just put them in and tighten down the hold-downs. You're done. Best news is that they're re-usable, so you don't have to worry about them being destroyed when you yank your valve covers.

$31.95 at Summit Racing

09-03-2002, 05:12 PM	#1
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Moroso "Perm-Align" Valve Cover Gaskets They're a rubber composite over a steel frame. OldIron suggested them to me, and they're absolutely awesome. No leaks what so ever, and I was having troubles before... Scrub down the heads and valve covers with brake cleaner and some scotch-brite. Blow off any residue. Use absolutely NO tack! Just put them in and tighten down the hold-downs. You're done. Best news is that they're re-usable, so you don't have to worry about them being destroyed when you yank your valve covers. $31.95 at Summit Racing __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.