Tuesday Pictures:
Took me 2 1/2 hours to get the headers installed.. They are fitted for this body style frame with the transdapt engine mounts I used, but they are a TIGHT fit. Had to test my patience a bit to get them in.. Have the MSD harness hooked up other then the map sensor ( don't have it plumbed in yet ) and mounting of the control box. Looks like the box will fit with out issue on the passenger side inner fender/fender area. Not real sure where yet, obviously
Need to come up with some bell reducers for 3/8 to 1/8 to get some factory sensors hooked up, along with fuel pump/lines, a/c bracket (coming in Thursday) along with a thousand other things I am going blank on right now.