[lvschevytrucks]

Originally Posted by gchemist

Nice upgrade. I wondered if it would get back on the road.

Ditch the metal fan. Install an Explorer 4.0 plastic fan. It will cool it better and A/C will rock!!

Originally Posted by Fat Hoe

So I took some pics of the stuff I'm having a hard time with.

First off is this vacuum line. It comes off of a sensor that is bolted to the drivers side of the intake manifold. You can see it extending up over the manifold. It's in the center of the pics.



You can se in this picture there's about a 10 or12 gauge with a ring terminal on the end that runs down the passenger side of the manifold and around the back of the manifold. I jet pulled it up so I could take a pic.
you can also see the end of the vacuum line in the previous pic




here you can see some brackets and braces and a harness. The last two pics are pics of each end of the harness. Thanks alot fellas.

Chuck why didnt you ask me these questions, I can answer all of them I took it apart and Know how it goes together. Call me when you get a chance and Ill explain it to you. The wire your holding in your hand not attached its off the other engine, you dont need it. If you need me to Ill come over to your house and show you whats what