Re: New to me Blazer
from memory the coil has a tower for the coil wire which leads to the cap, a 2 wire plug which feeds from the main harness (one pink and one white wire) which IIRC is a gray connector, and a short small harness (2 wire, also pink and white) with black connector that feeds to the ignition module.
I may have the connector colors mixed but the black one goes on first and then the gray one.
do you have tail lights? if not I can check today and see which wire to test at light switch. if tail lights do work I can tell you which wire to test at panel dimmer/dome switch.
I can't remember where the turn flasher is located, I'll have to check on that.
|