I should be getting mine soon. As soon as I do I will try to take before and after pictures of the output shaft of the trans, along with the exact amount that is need to take off in ordr to have proper clearance. I will probably (as mentioned earlier) just take it all off of the trans output shaft, So I will not heave to modify the input shaft of the t-case. I have both the trans and t-case out and cleaned up, so it should be pretty clear as to how it will work.
I did talk to the sales people about this, and as I mentioned earlier, and they were unaware that the adaptor could be used for this.
They have it as a conversion kit for going from a 700R4 to a TH350, and this adaptor would be needed to make up for the loss of trans length, so you do not have to move your crossmember forward. I assume you would also need a longer output shaft for the TH350 as well.
Anyway, I will keep you posted as I go. Hugger67, let us know of your progress as well....
