Hey folks,
I'll jump in with a question also. I am finishing my budget for my LS1 swap and I'd like some advice.
I am running an LS1 our of an 02' F body, which I believe is the "returnless" style rail. I am buying a tank with an intake Aeromotive stealth efi pump from Boyd's. My plan is to run the feed and return lines from the tank to Vette regulator, and then a single feed line to the LS1 rail. I plan on using all braided hose for simplicity of install.
Approx how many feet of line did you need? I dont have the motor yet so I cant measure. Im just doing this to finalize the spreadsheet
Would this kit be a good idea, along with an extra few feet (4-5?) of -4 AN line for the return + extra straight/90* fittings? I know I will need extra -6AN fittings and clamps.
http://www.summitracing.com/parts/SUM-PUMPKIT1/
I've never messed with fuel plumbing other than carbed stuff. Braided line/fittings are new to me.