The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 door gaps before and after?

leegreen · 03-28-2024, 12:10 PM

mine is 1952 but I think seals are the same

I installed in orientation shown by the piece being held in fingers here
Name: Capture.jpg
Views: 191
Size: 26.0 KB

Name: Capture.jpg
Views: 191
Size: 26.0 KB

that picture is from 45 seconds in on this video by Brothers https://www.youtube.com/watch?v=6GpF9VTghAk

my seals are Precision brand from KMS tools in BC. you have to wind up and slam the door to get it fully latched. I think my plan this year is to slice off most of the larger seal edge and if that does not help rip it off and replace with some generic weather stripping. ( I have a link saved on another computer to some that a member here swore by )

03-28-2024, 12:10 PM	#3
leegreen Registered User Join Date: Mar 2022 Location: Surrey BC Posts: 699	Re: door gaps before and after? mine is 1952 but I think seals are the same I installed in orientation shown by the piece being held in fingers here that picture is from 45 seconds in on this video by Brothers https://www.youtube.com/watch?v=6GpF9VTghAk my seals are Precision brand from KMS tools in BC. you have to wind up and slam the door to get it fully latched. I think my plan this year is to slice off most of the larger seal edge and if that does not help rip it off and replace with some generic weather stripping. ( I have a link saved on another computer to some that a member here swore by )