|
make sure you soak the area with PB blaster or something equal, so the bolt might wanna back out. As for the drill bit, have you tried a pilot point bit, start with a small bit and work your way up, keep some light weight oil on the bit so it's doesn't wear out, go slow steady and you should be able to drill the extractor out, it's not going to be easy. Other option, if you used a small extractor can you drill a hole next to it? when you do get it drilled out, might need to use some heat on area to get it to come out without breaking another, it could be worse, it could be a motor mount bolt, or a bellhousing bolt.
|