Thread
:
86 Silverado K20 12V CUMMINS Build
View Single Post
07-16-2013, 09:16 PM
#
47
brimc
Registered User
Join Date: Jun 2013
Location: New Lowell, Ontario, Canada
Posts: 248
Re: 86 Silverado K20 12V CUMMINS Build
I also cut the tops off so they would be flush with the angle iron already temporary bolted to the frame. I used my floor jack and a block of wood to hold it up into position.
Tack welded that into place after several checks with a tape measure. Then drilled all my holes. There will be 20, Grade 8, 3/8" 1 1/4" bolts holding the engine mounts and xmember onto the frame. ( 10 per side ) Pulled it off for final welding.
__________________
BRIAN
1986 Chevrolet K20 Silverado 12 Valve CUMMINS P Pumped Intercooled/Getrag360/Divorced NP205/10B/14BFF Detroit Locker - DD Canadian Winter Beater.
My Chevrolet
CUMMINS
Build
http://67-72chevytrucks.com/vboard/s...d.php?t=585509
brimc
View Public Profile
Find More Posts by brimc