The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tjsblazer · 06-28-2015, 08:58 PM

I also rechecked my header fit. I had done this once before when I originally was test fitting the NV4500 transmission. It did require just a little frame clearance primarily on the top flange. This was because I had moved the Engine 1.875" forward to get it where I needed for the transmission.

Just double checked now that everything was in for good to be sure. Nice clearance everywhere.

Rh side:

06-28-2015, 08:58 PM	#97
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: tjs 72 Blazer Build I also rechecked my header fit. I had done this once before when I originally was test fitting the NV4500 transmission. It did require just a little frame clearance primarily on the top flange. This was because I had moved the Engine 1.875" forward to get it where I needed for the transmission. Just double checked now that everything was in for good to be sure. Nice clearance everywhere. Rh side: Attached Images __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 06-28-2015 at 10:42 PM.