Quote:
Originally Posted by jonzcustomshop
60-63 (lh side of pic), and 64-66 deluxe heater boxes:
notice in the rear shot, (60-63 is the lower one in the pic) the difference in the rh bolt location, also notice the mount for the "heat" cable is in a different spot.
3rd pic: I noticed that the "heat" cable comes through the back of the 63 box, and through the front of the 60 box, there is also a lower cable guide on the fan box of the 60.
60-63 the "heat" cable mounts inside the box.
|
just gettin around to the heater part on my 1960 Apache "revitilization". Ordered a cable kit from LMC and was scratchin my head on the heater valve cable not bein long enough. I made one off a lawn mover but it was too hard to move and likely woulda snapped off the heater control arm. I looked inside the core body and its set up with 2 cable clamps, front and back. So I drilled a hole in the firewall and another in the backside of the heater body, same as in the pic above, and the LMC cable is now long enough.
Guess thats why Chevy changed it up.