Re: Shocks for a bagged 64
I just posted a spread sheet on the KYB part number thread.
For the front shock: Without the shock installed, measure the center to center of the mounting holes for the shock mounts when the truck is aired out. If that number is equal or more than 9.75", then the 344068 shock will work for the front. If it is less than that number, the shock will bottom out before getting all the way down to the aired out stance.
For the rear do the same thing aired out, if the measurement is equal or more than 11.75", then the 344055 shock will work. If it is less then that, the shock will bottom out before the suspension does.
Hope this helps. If you do measure your truck, can yo post up some pictures and measurements?
|