The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FLcustom10 · 11-08-2011, 10:02 AM

sorry - The orange wire was just an example to show the type of plug.

Instructions from the Painless wiring manual are below:

8.0 SPECIFIC CIRCUIT CONNECTIONS
8.1 Interior Lighting. See Figure 8.1
8.1.1 Interior lights are switched through the optional door switches and/or the dashmounted
headlight switch, which is usually rotated counter-clockwise to turn on.
These switches apply ground to the circuit. YOU WILL NEED TO SUPPLY THE
GROUND WIRES that go to the door switches. We have connected the wire that goes from the light to the headlight switch for you. 12V is continually present at the light bulbs. See Figure 8.5.
8.1.2 If you are using door switches, you will need to add the wires connecting them.
Connect one end of the wire to the door switch and the other end to (wht) at the pigtail under the fuse block. See Figure 8.5.
10

11-08-2011, 10:02 AM	#16
FLcustom10 Registered User Join Date: Feb 2007 Location: Tallahassee, FL Posts: 322	Re: Pics of door loom and door jamb switches sorry - The orange wire was just an example to show the type of plug. Instructions from the Painless wiring manual are below: 8.0 SPECIFIC CIRCUIT CONNECTIONS 8.1 Interior Lighting. See Figure 8.1 8.1.1 Interior lights are switched through the optional door switches and/or the dashmounted headlight switch, which is usually rotated counter-clockwise to turn on. These switches apply ground to the circuit. YOU WILL NEED TO SUPPLY THE GROUND WIRES that go to the door switches. We have connected the wire that goes from the light to the headlight switch for you. 12V is continually present at the light bulbs. See Figure 8.5. 8.1.2 If you are using door switches, you will need to add the wires connecting them. Connect one end of the wire to the door switch and the other end to (wht) at the pigtail under the fuse block. See Figure 8.5. 10 Attached Images Last edited by FLcustom10; 11-08-2011 at 10:10 AM.