View Single Post
Old 11-02-2019, 01:15 PM   #4
selective wrench turner guy
sweetk30's Avatar
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,375
Re: Q: will 4x4 rear springs work on my 4x2 blazer?

springs are the same . its the height of the hangers on the vehicle frame for our square body trucks .

now there is different packs for leaf count and weight capacity so watch out for this .

also there is 52" eye to eye and 56" eye to eye . the 56" is more heavy 3/4 and all 1tons but some 1/2 tons got them .

most replacement springs are cheaper for the heavy option as most are upgrading . lots of times all you need to do a clamp the springs both sides of the center pin and pull the pin let the pack un compress BE CAREFUL and pull the lowest spring / shortest / bottom leaf and re assemble and install .
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote