The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

CG · 11-20-2020, 08:48 PM

Thanks for the info. Ill double check mine for poor riveting.

Just checked them. The tag is from 92. The left hand one is super tight, no slop at all. The right hand side has a little tick/clickieness, hard to describe. Definitively wouldn't say it needs a rebuild though its not as tight as the left. Ill probably just hang on to them. I hate dealing with possible grief, especially if I ended up shipping them off somewhere.

Guy offered me 150 for the pair. In my mind I was thinking closer to 300, I told him sorry Im not letting em go for that.

11-20-2020, 08:48 PM	#3
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,782	Re: NOS Set of hood hinges Thanks for the info. Ill double check mine for poor riveting. Just checked them. The tag is from 92. The left hand one is super tight, no slop at all. The right hand side has a little tick/clickieness, hard to describe. Definitively wouldn't say it needs a rebuild though its not as tight as the left. Ill probably just hang on to them. I hate dealing with possible grief, especially if I ended up shipping them off somewhere. Guy offered me 150 for the pair. In my mind I was thinking closer to 300, I told him sorry Im not letting em go for that. __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291 Last edited by CG; 11-20-2020 at 09:04 PM.