The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**The Rocknrod** · 01-12-2021, 05:29 AM

So Summit finally got back to me about their vendor sending me too much sound deadner/heat shield. Seems they (the vendor) will be sending me the correct stuff and a UPS will call to send out the boxes of incorrectly sent items.
Slows my whole door process down quite a bit. Once the glass goes in can't get in the sound deadner.
And my door mirror, the three fastener holes are 5/6"-18 not 1/4"-20 that was sent with the mirror, another slow down. I ordered three stainless ones from the bolt depot, so I'll be polishing those when they get in.
Guess it's time to call Extreme Automatics for my transmission and Blueprint Engines for the engine.

01-12-2021, 05:29 AM	#337
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So Summit finally got back to me about their vendor sending me too much sound deadner/heat shield. Seems they (the vendor) will be sending me the correct stuff and a UPS will call to send out the boxes of incorrectly sent items. Slows my whole door process down quite a bit. Once the glass goes in can't get in the sound deadner. And my door mirror, the three fastener holes are 5/6"-18 not 1/4"-20 that was sent with the mirror, another slow down. I ordered three stainless ones from the bolt depot, so I'll be polishing those when they get in. Guess it's time to call Extreme Automatics for my transmission and Blueprint Engines for the engine. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 01-12-2021 at 05:36 AM.