The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 02-19-2020, 04:27 PM

Went by the transmission shop that built the 700-R4 for me. Asked about wiring up the torque converter. They told me all I needed was the 4 prong connector that goes on the side of the transmission and a brake light switch for cruise. Put 12 volts to it and it will lockup in 4th anytime it's over 45MPH. The brake switch will knock it off also. I also ran a toggle switch so I can manually turn it off if not needed.

02-19-2020, 04:27 PM	#148
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... Went by the transmission shop that built the 700-R4 for me. Asked about wiring up the torque converter. They told me all I needed was the 4 prong connector that goes on the side of the transmission and a brake light switch for cruise. Put 12 volts to it and it will lockup in 4th anytime it's over 45MPH. The brake switch will knock it off also. I also ran a toggle switch so I can manually turn it off if not needed. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.