Quote:
Originally Posted by profe56
Thanks again Travis for all the information, I went to the mechanic is going to helping me and he gave a different opttion, He said install a Camaro manual transmission because I won´t need the cluth set up. But now what do you think could be the better option?
|
Sorry I missed this before profe but I'm not up to speed on using the camaro transmission so I can't offer an opinion on that. Sorry.
Quote:
Originally Posted by Beuford
I used a torbo 400 front yoke as the tailshaft in the 5 spd is the same and it was a 3" universal. If you find one tha has 1.062 cups but is 3" if you buy a universal for the `70 and one for the `90 you will have both cup sizes. The pin on the universal is the same dia for both joints so just use 2 cups from the `70 and 2 from the `90 and it should work fine. The yoke I found used 1" so it fit my truck.
|
Sounds like it would just be easier to use the 400 yoke.
Quote:
Originally Posted by Beuford
I have no pics of the cross member mods.
|
Say, how long would it take you to fix that?