[quote=68 TT;3505863]
Quote:
Originally Posted by Captainfab
The 98 to 2002 Camaro front caliper is on a 1.25" thick 12" diameter rotor so it would work on the same thickness truck rotor.
The guys on thirdgen.org have worked out ways of putting these PBR calipers onto their spindles that have cast in caliper mount bosses which could be adapted for use on our trucks too.
This caliper could be used on the 14-bolt rear disc conversion that uses the Dana-44 front rotors if you didn't need an e-brake.
|
Thanks for the info on that. I'll check into that when i get a chance. My son has a 2000 Z28 so that will make it easy.
Quote:
Originally Posted by KcLevi
Just a FYI GM used same prop valve for the Disc/Drum B-body they used it on the Disc/Disc B-body. Only 9c1 and SS had rear disc not Roadmasters.
|
Thanks for the info on that also