View Single Post
Old 07-26-2020, 09:25 PM   #2
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,613
Re: Lowering rear 1.5"?

drop springs or drop hanger for the front spring eye location.

i did mine with the drop hanger and shackle to get it dialed in . i just moved my hanger up and re-drilled the holes and used 7/16 bolts with stover / crimp lock nuts . then the rear i did have to notch the crossmember on the box for the shackle .

but mine i went down 2.5" front and rear . so if you did just hanger in the rear at the front of the leaf spring you will prob be fine i think . just be sure to check pinion angle .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote