View Single Post
Old 10-21-2019, 08:05 AM   #4
SunSoaked
Registered User
 
SunSoaked's Avatar
 
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,524
Re: Help please. Bed alignment issue.

I'll get some pics this morning. There seems there may be two issues.
1. The horizontal belt line does not line up on the driver's side. The front of the bed is about 1/2 higher than the cab. If I jack the back of the cab up until it lines up, then it peaks in the middle and looks like the bed tilts down towards the rear. It looks like the front of the bed sits too high but, I believe it sits directly on the frame?

2. Looking down the side, the front of the bed is about 1/2 inch off from the sides of the cab. This creates a gap between the cab/bed to be different from side to side. From above, it seems I need to rotate the bed clockwise a degree or two.
I hope this makes sense. Lol
SunSoaked is offline   Reply With Quote