[brossow]

Originally Posted by Leviticus

Well...got some bad news boys. The new revised fronts don't fit. Looks like it is the same issue as before, it won't seat all the way down onto the rotor, looks like it is tight at the front of the hub bore like before.

You sure you got the -3 revision? Doesn't sound like it. Do you have a caliper (measuring device, not the brake component) to measure the bore? Please post some pics, including one of the label on the box.

Originally Posted by Leviticus

And just to sweeten the deal the rear 20x10 will require a spacer to fit. I didn't have the tires on but it looks like (judging by sight) about a 1/4 to 1/2" spacer to not rub on the inside of the fender well.

Well, we are dealing with Boss here, what did we expect

Hey, now. You can't blame them for your failure to consider backspacing before ordering. As I've said before, the purpose of the revision was to correct the front hub fitment issue, not to change the backspacing (which is unchanged and which you should have recognized as an issue before making your purchase).